Antifoam (JF-4060) is a silicone defoamer for use in oilfield applications. It
will prevent foaming in virtually any industrial application. It acts quickly
breaking up the foam without altering the effectiveness of the cleaning
solution or effluent treatment chemicals being used.
Antifoam may also be used as a lubricant, slip & release agent.
Antifoam is ideal for foam control in:
--Oilfield drilling mud, the mud recovery rate is close to 100%
--Indsutrial waste water treatment
--Room temperature textile dyeing and printing
--Other water phase foams that require fast defoaming
Product features:
Fast Acting
Good Acid and alkali resistant
Economical
Will suppress almost any type of foam Easy to use
Suitable for use as a slip agent Easy to disperse in the water
Typical Physical Properties
Technical data should be considered representative or typical only and should not be used
for specification purposes.
Appearance: White to light yellow emulsion liquid..
Directions for Use
Defoamer has excellent elimination and antifoaming properties. It can be added after the foam
is produced or added as a foam inhibiting component. The defoaming agent can be added in
an amount of 10~100ppm. The optimal dosage is tested by the customer according to the
specific conditions. Decide.
Defoamer products can be used directly or diluted. If it can be fully stirred and dispersed in
the foaming system, it can be added directly without dilution. If it needs to be diluted, it
should be diluted according to the technician's method. It should not be diluted directly
with wa
Note
Note: It is not suitable for use as a slip with cardboard or other material that
would be affected by water. Store at 0°C -30°C.
Please refer to appropriate safety data sheet (SDS) prior to using this product.
Applied will replace any material found to be defective. Because the storage,
handling and application of this material is beyond our control, we can accept no
liability for the results obtained.
All information on this data sheet is based on laboratory testing and is not intended
for design purposes. ITW Polymers & Fluids and Applied makes no
representations or warranties of any kind concerning this data
Audited Supplier 
){kind=link}